Top-level menu

1 System
    1-1 System configuration
        1-1-1 Network config
            1-1-1-1 Set up interface #1
            1-1-1-2 Set up interface #2
            1-1-1-3 Set up bond
            1-1-1-4 Set default gateway
            1-1-1-5 Set up routing *
            1-1-1-6 Show routing table
            1-1-1-7 Ping remote host
            1-1-1-8 Trace route to host
        1-1-2 Hardserver config
        1-1-3 Remote file system
        1-1-4 Client config *
        1-1-5 Resilience config
        1-1-6 Config file options
            1-1-6-1 Fetch configuration
            1-1-6-2 Client config push
        1-1-7 Log config
        1-1-8 Date/time setting
        1-1-9 Keyboard layout
            1-1-9-1 UK keyboard
            1-1-9-2 US keyboard
        1-1-10 Default config
        1-1-11 Remote configuration options
            1-1-11-1 Remote mode change
    1-2 System information
        1-2-1 View system log
        1-2-2 View hardserver log
        1-2-3 View IPv6 addresses
        1-2-4 Display tasks
        1-2-5 Component versions
        1-2-6 View h/w diagnostics
            1-2-6-1 View power readings
            1-2-6-2 View other readings
            1-2-6-3 Critical Errors
        1-2-7 View tamper log
        1-2-8 View unit id
    1-3 Login settings
        1-3-1 Enable UI Lockout
            1-3-1-1 UI Lockout with OCS
            1-3-1-2 UI Lockout w/out OCS
        1-3-2 Power switch lockout
        1-3-3 Login control status
    1-4 Upgrade system
    1-5 Factory state
    1-6 Shutdown/Reboot
        1-6-1 Shutdown
        1-6-2 Reboot
2 HSM
    2-1 HSM information
        2-1-1 Display details
        2-1-2 Display secure RTC
        2-1-3 Speed test
        2-1-4 Display statistics
    2-2 HSM reset
    2-3 HSM feature enable
        2-3-1 Read FEM from card
        2-3-2 Read from a file
        2-3-3 View current state
        2-3-4 Write state to file
    2-4 Set HSM mode
        2-4-1 Operational
        2-4-2 Initialization
3 Security World mgmt
    3-1 Display World info
    3-2 Module initialization
        3-2-1 New Security World
        3-2-2 Load Security World
        3-2-3 Erase Security World
    3-3 RFS operations
        3-3-1 Update World files
        3-3-2 Remove RFS lock
    3-4 Admin operations
        3-4-1 Replace ACS
        3-4-2 Recover keys
        3-4-3 Recover PIN
        3-4-4 Set secure RTC
    3-5 Cardset operations
        3-5-1 Create OCS
        3-5-2 List cardsets
    3-6 Card operations
        3-6-1 Card details
        3-6-2 Check PIN
        3-6-3 Change PIN
        3-6-4 Erase card
    3-7 Keys
        3-7-1 List keys
        3-7-2 Verify key ACLs
    3-8 Set up remote slots *
    3-9 Set up dynamic slots
        3-9-1 Dynamic Slots
        3-9-2 Slot mapping
4 CodeSafe *