A link to the Entrust website
nShield Documentation
Videos Contact support

nShield Security World

    • nShield Security World v13.4.5 Release Notes
    • nShield Security World v13.4.5 Security Manual
      • Supply and Transportation
      • Environment
      • Commissioning
      • Access Control
      • Operation
      • Key Management
      • Physical Security
      • Audit
      • Support and Maintenance
      • Security Incident and Response
      • Decommission and Disposal
      • Abbreviations
    • nShield Connect v13.4.5 Install Guide
      • Recycling and disposal information
      • Before you install the software
      • Installing the software
      • Before installing an HSM
      • Installing an HSM
      • Front panel controls
      • Top-level menu
      • Basic HSM, RFS and client configuration
      • Troubleshooting
      • HSM maintenance
      • Approved accessories
      • Uninstalling existing software
      • Software packages on the Security World software installation media
      • Valid IPv6 Addresses
    • nShield Connect v13.4.5 User Guide
      • Security Worlds
      • The front panel interface
      • Physical security of the HSM
      • Software installation
      • Client Software and module configuration
      • Enabling optional features
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Working with CodeSafe
      • Remote Operator
      • Resource Watchdog
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Using silent installations
      • Using nShield commands from PowerShell
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • HSM and client configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on the HSM
      • Maintenance of nShield Hardware
      • Upgrading the image file and associated firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Uninstalling Security World Software
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
      • Remote File System Volumes
    • nShield 5c v13.4.5 Install Guide
      • Recycling and disposal information
      • Before you install the software
      • Installing the software
      • Before installing an HSM
      • Installing an HSM
      • Front panel controls
      • Top-level menu
      • Basic HSM, RFS and client configuration
      • Troubleshooting
      • HSM maintenance
      • Approved accessories
      • Uninstalling existing software
      • Software packages on the Security World software installation media
      • Valid IPv6 Addresses
    • nShield 5c v13.4.5 User Guide
      • Security Worlds
      • The front panel interface
      • Physical security of the HSM
      • Software installation
      • Client Software and module configuration
      • Enabling optional features
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Working with CodeSafe
      • Remote Operator
      • Resource Watchdog
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Using silent installations
      • Using nShield commands from PowerShell
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • HSM and client configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on the HSM
      • Maintenance of nShield Hardware
      • Upgrading the image file and associated firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Uninstalling Security World Software
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
      • Remote File System Volumes
    • nShield Solo and Solo XC v13.4.5 Install Guide
      • Hardware security modules
      • Regulatory notices
      • Before installing the module
      • Installing the module
      • Before you install the software
      • Installing the software
      • Checking the installation
      • Status indicators
      • Uninstalling existing software
      • Software packages on the Security World installation media
      • Virtualization Remote Server
    • nShield Solo and Solo XC v13.4.5 User Guide
      • Security Worlds
      • Software installation
      • Client Software and module configuration
      • Enabling optional features
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Working with Codesafe
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Using silent installations
      • Using nShield commands from PowerShell
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • Hardserver configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on an nShield Solo module
      • Maintenance of nShield Hardware
      • Upgrading firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Uninstalling Security World Software
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
    • nShield 5s v13.4.5 Install Guide
      • Hardware security modules
      • Regulatory notices
      • Before installing the module
      • Installing the module
      • Before you install the software
      • Installing the software
      • Setting the system clock
      • Checking the installation
      • HSM status and error codes
      • Uninstalling existing software
      • Software packages on the Security World installation media
    • nShield 5s v13.4.5 User Guide
      • Security Worlds
      • Platform services and ncoreapi
      • nShield 5s modes of operation
      • Software installation
      • Set up communication between host and module
      • Administration of platform services
      • Client Software and module configuration
      • Enabling optional features
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Working with CodeSafe
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Using silent installations
      • Using nShield commands from PowerShell
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • Hardserver configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Maintenance of nShield Hardware
      • Upgrading firmware
      • SNMP monitoring agent
      • HSM status and error codes
      • Uninstalling Security World Software
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
      • SSH Client Key Protection
    • nShield Edge v13.4.5 Install Guide
      • Safety and security
      • Regulatory notices
      • Before you install the software
      • Installing the software
      • Setting up the nShield Edge
      • Using the nShield Edge
      • Troubleshooting
      • nShield Edge Windows compatibility issues and considerations
      • Dimensions and operating conditions
      • Uninstalling existing software
      • Software packages
    • nShield Edge v13.4.5 User Guide
      • Security Worlds
      • Software installation
      • Client Software and module configuration
      • Enabling optional features
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Using silent installations
      • Using nShield commands from PowerShell
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • Hardserver configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on an nShield Edge
      • Upgrading firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Uninstalling Security World Software
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
    • CodeSafe 5 v13.4.5 Developer Guide
      • Overview of CodeSafe 5
      • Install the CodeSafe 5 SDK on Linux
      • Install the CodeSafe 5 SDK on Windows
      • nShield 5c Codesafe 5 Configuration
      • Build CodeSafe 5 SDK apps
      • Sign and deploy CodeSafe 5 SDK apps using csadmin
      • Build and sign example SEE machines on Linux
      • Build and sign example SEE machines on Windows
      • Debug CodeSafe 5 SEE machines
      • Uninstall the CodeSafe 5 SDK
      • Port existing CodeSafe application to CodeSafe 5
      • Supporting legacy CodeSafe Direct
      • SEE API documentation
      • System calls allowed by CodeSafe 5 SEE machines
    • CodeSafe v13.4.5 Developer Guide
      • About the Secure Execution Engine SEE
      • Designing SEE machines and SEE-ready HSMs
      • Example SEE machines
      • Debugging SEE machines
      • Deploying SEE Machines
      • Utilities
      • Environment variables
      • Key generation options and parameters
      • SEElib functions
      • Differences between glibc and bsdlib (SoloXC only)
      • SEE Machines Whitelist
    • Remote Administration v13.4.5 User Guide
      • Requirements
      • Server-side preparation tasks
      • Install the Remote Administration Client (RAC) software
      • Use the Remote Administration Client (RAC) software
      • Troubleshooting
      • Uninstall the Remote Administration Client (RAC) software
    • TVD v13.4.5 Install and User Guide
      • Safety and security
      • Setting up the nShield Trusted Verification Device
      • Using the nShield Trusted Verification Device
      • Dimensions and operating temperatures
    • nCore API v13.4.5 Developer Tutorial
      • nCore architecture
      • C tutorial
      • Java tutorial
      • Python 3 tutorial
      • Java examples
      • Key structures
      • NFKM Functions
      • OpenSSL with NFKM Engine
      • nCore API commands
    • Microsoft CryptoAPI Guide for nShield Security World v13.4.5
      • nShield Architecture
      • Microsoft CAPI CSP
      • Supported Algorithms
      • Key Generation and Storage
      • User Interface Issues
      • Key Counting
      • NVRAM-Stored Keys
      • CSP Setup and Utilities
    • Microsoft CNG Guide for nShield Security World v13.4.5
      • nShield Architecture
      • CNG Architecture Overview
      • Supported Algorithms
      • Key Authorization
      • Key Use Counting
      • Using CAPI Keys
      • Utilities
      • Environment Variables for CNG Protection
    • nCipherKM JCA JCE CSP v13.4.5 API Guide
      • nShield Architecture
      • Installing the nCipherKM JCA/JCE CSP
      • System Properties
      • Compatibility
      • Architecture
      • Available Functions
      • The KeyStore API
      • Initialization
      • Loading and Storing Keys
      • keytool
      • Using Keys
    • PKCS 11 Reference Guide for nShield Security World v13.4.5
      • nShield Architecture
      • PKCS #11 Developer libraries
      • PKCS #11 with load sharing mode
      • PKCS #11 with HSM Pool mode
      • Generating and deleting NVRAM-stored keys with PKCS #11
      • PKCS #11 with key reloading
      • PKCS #11 without load-sharing or HSM Pool modes
      • PKCS #11 Security Officer
      • nShield-specific PKCS #11 API extensions
      • Compiling and linking
      • Objects
      • Mechanisms
      • Vendor annotations on P11 mechanisms
      • Vendor-defined mechanisms
      • KISAAlgorithm mechanisms
      • Attributes
      • Utilities
      • General purpose functions
      • Slot and token management functions
      • Standard session management functions
      • nShield session management functions
      • Object management functions
      • Encryption functions
      • Decryption functions
      • Message digesting functions
      • Signing and MACing functions
      • Functions for verifying signatures and MACs
      • Dual-purpose cryptographic functions
      • Key-management functions
      • Random number functions
      • Parallel function management functions
      • Callback functions
    • PDFs
nShield Security World v13.4.5
  • Application Notes
  • Cloud Integration Option Pack
    • v2.2.3
    • v2.2.2
    • v2.2.1
  • KeySafe 5
    • v1.4
    • v1.3
    • v1.2
    • v1.1
    • v1.0
  • nShield Container Option Pack
    • v1.1.3
    • v1.1.2
    • v1.1.1
  • nShield Database Security Option Pack
    • v2.1.0
  • nShield Docs
  • nShield HSM hardware regulatory and maintenance documentation
  • nShield Key Attestation
    • v1.0.2
  • nShield Monitor
    • v3.1.0
    • v3.0.0
    • v2.9.8
    • v2.9.7
    • v2.9.5
    • v2.9.0
    • v2.8.0
  • nShield Post-Quantum Software Development Kit
    • v1.1.3
    • v1.2.1
    • v1.1.0
  • nShield Security World
    • v13.6.11
    • v13.7.3
    • v13.5.1
    • v13.4.5
    • v13.3
    • v13.2.4
    • v12.81
    • v12.80
    • v12.72.4
    • v12.50.4
    • v12.40
  • nShield Security World Release Information
  • nShield smart cards
  • Release Notes
  • Time Stamp Option Pack
    • v8.1.0
    • 8.0.0
    • 7.20.0
  • Web Services Option Pack
    • v3.3.1
    • v3.3.0
    • v3.2.0
    • v3.1.0
    • v3.0.2
  • Web Services SQLEKM Provider
    • v1.0.0
  • nShield Security World
  • nShield 5s v13.4.5 User Guide
  • Product returns
View guide as PDF
v13.6.11 v13.7.3 v13.5.1 v13.4.5 v13.3 v13.2.4 v12.81 v12.80 v12.72.4 v12.50.4 v12.40
Email the nShield docs team

Product returns

If you need to return your nShield HSM, contact Entrust nShield Support for instructions: https://nshieldsupport.entrust.com

Before returning your nShield HSM you should return it to factory state by following the procedure described in nShield 5s modes of operation.

©2025 Entrust Corporation. All rights reserved.

This website was last updated on