Top-level menu

If you select an option, the module displays the menu options in the level below.

If you cancel a selected option, you return to level above.

* Submenus depend on the settings of the module.

1 System
    1‑1 System configuration
        1-1‑1 Network config
            1‑1‑1‑1 Set up interface #1
            1‑1‑1‑2 Set up interface #2
            1-1-1-3 Set up bond
            1‑1‑1‑4 Set default gateway
            1‑1‑1‑5 Set up routing *
            1‑1‑1‑6 Show routing table
            1‑1‑1‑7 Ping remote host
            1‑1‑1‑8 Trace route to host
            1-1-1-9 Set IPv6 compliance
        1‑1‑2 Hardserver config
        1‑1‑3 Remote file system
        1‑1‑4 Client config *
        1‑1‑5 Resilience config
        1‑1‑6 Config file options
            1‑1‑6‑1 Fetch configuration
            1‑1‑6‑2 Setup auto push
        1‑1‑7 Log config
        1‑1‑8 Date/time setting
        1‑1‑9 Keyboard layout
            1‑1‑9‑1 UK keyboard
            1‑1‑9‑2 US keyboard
        1‑1‑10 Tamper config
        1‑1‑11 Default config
        1-1-12 Remote configuration options
        1-1-12-1 Remote mode change
    1‑2 System information
        1‑2‑1 View system log
        1‑2‑2 View hardserver log
        1‑2‑3 View IPv6 addresses
        1-2-4 Display tasks
        1‑2‑5 Component versions
        1‑2‑6 View h/w diagnostics
            1‑2‑6‑1 View power readings
            1‑2‑6‑2 View other readings
            1‑2‑6‑3 Critical Errors
        1‑2‑7 View tamper log
        1‑2‑8 View unit id
    1‑3 Login settings
        1-3-1 Enable UI Lockout
            1-3-1-1 UI Lockout with OCS
            1-3-1-2 UI Lockout w/out OCS
        1-3-2 Power switch lockout
        1-3-3 Login control status
    1‑4 Upgrade system
    1‑5 Factory state
    1‑6 Shutdown/Reboot
        1‑6‑1 Shutdown
        1‑6‑2 Reboot
2 HSM
    2‑1 HSM information
        2‑1‑1 Display details
        2‑1‑2 Display secure RTC
        2‑1‑3 Speed test
        2‑1‑4 Display statistics
    2‑2 HSM reset
    2‑3 HSM feature enable
        2‑3‑1 Read FEM from card
        2‑3‑2 Read from a file
        2‑3‑3 View current state
        2‑3‑4 Write state to file
    2‑4 Set HSM mode
        2‑4‑1 Operational
        2‑4‑2 Initialization
3 Security World mgmt
    3‑1 Display World info
    3‑2 Module initialization
        3‑2‑1 New Security World
        3‑2‑2 Load Security World
        3‑2‑3 Erase Security World
    3‑3 RFS operations
        3‑3‑1 Update World files
        3‑3‑2 Remove RFS lock
    3‑4 Admin operations
        3‑4‑1 Replace ACS
        3‑4‑2 Recover keys
        3‑4‑3 Recover PIN
        3‑4‑4 Set secure RTC
    3‑5 Cardset operations
        3‑5‑1 Create OCS
        3‑5‑2 List cardsets
    3‑6 Card operations
        3‑6‑1 Card details
        3‑6‑2 Check PIN
        3‑6‑3 Change PIN
        3‑6‑4 Erase card
    3‑7 Keys
        3‑7‑1 List keys
        3‑7‑2 Verify key ACLs
    3‑8 Set up remote slots *
    3-9 Set up dynamic slots
        3-9-1 Dynamic Slots
        3-9-2 Slot mapping
4 payShield *
5 CodeSafe *