A link to the Entrust website
nShield Documentation
Videos Contact support

nShield Security World

  • nShield Security World v12.81 Release Notes
    • Release notes
    • nShield Security World v12.81 Security Manual
      • Supply and Transportation
      • Environment
      • Commissioning
      • Access Control
      • Operation
      • Key Management
      • Physical Security
      • Audit
      • Support and Maintenance
      • Security Incident and Response
      • Decommission and Disposal
      • Abbreviations
    • nShield Connect v12.81 Install Guide
      • Recycling and disposal information
      • Before you install the software
      • Installing the software
      • Before installing an nShield Connect
      • Installing an nShield Connect
      • Front panel controls
      • Top-level menu
      • Basic nShield Connect, RFS and client configuration
      • Troubleshooting
      • nShield Connect maintenance
      • Approved accessories
      • Uninstalling existing software
      • Software packages on the Security World software installation media
      • Valid IPv6 Addresses
    • nShield Connect v12.81 User Guide (Linux)
      • Security Worlds
      • The nShield Connect user interface
      • Physical security of the nShield Connect
      • Software installation
      • Client Software and module configuration
      • Security World Remote Administration
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Supplied utilities
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • nShield Connect and client configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on an nShield Connect
      • Upgrading the nShield Connect image file and associated firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
    • nShield Connect v12.81 User Guide (Windows)
      • Security Worlds
      • The nShield Connect user interface
      • Physical security of the nShield Connect
      • Software installation
      • Client Software and module configuration
      • Security World Remote Administration
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Supplied utilities
      • Using silent installations
      • Using nShield commands from PowerShell
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • nShield Connect and client configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on an nShield Connect
      • Upgrading the nShield Connect image file and associated firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Uninstalling Security World Software
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
    • nShield nToken v12.81 Install Guide
      • Hardware security modules
      • Regulatory notices
      • Before installing the module
      • Installing the module
      • Before you install the software
      • Installing the software
      • Status indicators
      • Configuring and checking the installation
      • Uninstalling existing software
      • Software packages on the Security World installation media
    • nShield Solo v12.81 Install Guide
      • Hardware security modules
      • Regulatory notices
      • Before installing the module
      • Installing the module
      • Before you install the software
      • Installing the software
      • Checking the installation
      • Status indicators
      • Uninstalling existing software
      • Software packages on the Security World installation media
      • Virtualization Remote Server
    • nShield Solo v12.81 User Guide (Linux)
      • Security Worlds
      • Software installation
      • Client Software and module configuration
      • Security World Remote Administration
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • Hardserver configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on an nShield Solo module
      • Checking and changing the mode on an nShield Edge
      • Upgrading firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
    • nShield Solo v12.81 User Guide (Windows)
      • Security Worlds
      • Software installation
      • Client Software and module configuration
      • Security World Remote Administration
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Using silent installations
      • Using nShield commands from PowerShell
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • Hardserver configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on an nShield Solo module
      • Checking and changing the mode on an nShield Edge
      • Upgrading firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Uninstalling Security World Software
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
    • nShield Edge v12.81 Install Guide
      • Safety and security
      • Regulatory notices
      • Before you install the software
      • Installing the software
      • Setting up the nShield Edge
      • Using the nShield Edge
      • Troubleshooting
      • nShield Edge Windows compatibility issues and considerations
      • Dimensions and operating conditions
      • Uninstalling existing software
      • Software packages
    • nShield Edge v12.81 User Guide (Linux)
      • Security Worlds
      • Software installation
      • Client Software and module configuration
      • Security World Remote Administration
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • Hardserver configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on an nShield Edge
      • Checking and changing the mode on an nShield Solo
      • Upgrading firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
    • nShield Edge v12.81 User Guide (Windows)
      • Security Worlds
      • Software installation
      • Client Software and module configuration
      • Security World Remote Administration
      • Creating and managing a Security World
      • Managing card sets and softcards
      • Application interfaces
      • Remote Operator
      • Working with keys
      • Using KeySafe
      • Warrant Management
      • Supplied utilities
      • Using silent installations
      • Using nShield commands from PowerShell
      • Preload Utility
      • Environment variables
      • Logging, debugging, and diagnostics
      • Hardserver configuration files
      • Cryptographic algorithms
      • Audit Logging
      • Key generation options and parameters
      • Checking and changing the mode on an nShield Edge
      • Checking and changing the mode on an nShield Solo
      • Upgrading firmware
      • SNMP monitoring agent
      • Morse code error messages
      • Uninstalling Security World Software
      • Application Performance Tuning
      • Merged Keys Concept
      • Product returns
    • CodeSafe v12.81 User Guide (Linux)
      • About the Secure Execution Engine SEE
      • Designing SEE machines and SEE-ready HSMs
      • Example SEE machines
      • Debugging SEE machines
      • Deploying SEE Machines
      • Utilities
      • Environment variables
      • Key generation options and parameters
      • SEElib functions
      • Differences between glibc and bsdlib (SoloXC only)
      • SEE Machines Whitelist.adoc
    • CodeSafe v12.81 User Guide (Windows)
      • About the Secure Execution Engine SEE
      • Designing SEE machines and SEE-ready HSMs
      • Example SEE machines
      • Debugging SEE machines
      • Deploying SEE Machines
      • Utilities
      • Environment variables
      • Key generation options and parameters
      • SEElib functions
      • Differences between glibc and bsdlib (SoloXC only)
      • SEE Machines Whitelist.adoc
    • Remote Administration v12.81 User Guide
      • Requirements
      • Server-side preparation tasks
      • Install the Remote Administration Client (RAC) software
      • Use the Remote Administration Client (RAC) software
      • Troubleshooting
      • Uninstall the Remote Administration Client (RAC) software
    • TVD v12.81 Install and User Guide
      • Safety and security
      • Setting up the nShield Trusted Verification Device
      • Using the nShield Trusted Verification Device
      • Dimensions and operating temperatures
    • nCore v12.81 Developer Tutorial
      • nCore architecture
      • C tutorial
      • Java tutorial
      • Python 3 tutorial
      • Java examples
      • Key structures
      • NFKM Functions
      • nCore API commands
    • Cryptographic API v12.81 Guide
      • nShield architecture
      • PKCS #11
      • Microsoft CAPI CSP
      • Microsoft CNG
      • nCipherKM JCA/JCE CSP
    • PDFs
nShield Security World v12.81
  • Application Notes
  • Cloud Integration Option Pack
    • v2.2.3
    • v2.2.2
    • v2.2.1
  • KeySafe 5
    • v1.4
    • v1.3
    • v1.2
    • v1.1
    • v1.0
  • nShield Container Option Pack
    • v1.1.3
    • v1.1.2
    • v1.1.1
  • nShield Database Security Option Pack
    • v2.1.0
  • nShield Docs
  • nShield HSM hardware regulatory and maintenance documentation
  • nShield Key Attestation
    • v1.0.2
  • nShield Monitor
    • v3.1.0
    • v3.0.0
    • v2.9.8
    • v2.9.7
    • v2.9.5
    • v2.9.0
    • v2.8.0
  • nShield Post-Quantum Software Development Kit
    • v1.1.3
    • v1.2.1
    • v1.1.0
  • nShield Security World
    • v13.6.11
    • v13.7.3
    • v13.5.1
    • v13.4.5
    • v13.3
    • v13.2.4
    • v12.81
    • v12.80
    • v12.72.4
    • v12.50.4
    • v12.40
  • nShield Security World Release Information
  • nShield smart cards
  • Release Notes
  • Time Stamp Option Pack
    • v8.1.0
    • 8.0.0
    • 7.20.0
  • Web Services Option Pack
    • v3.3.1
    • v3.3.0
    • v3.2.0
    • v3.1.0
    • v3.0.2
  • Web Services SQLEKM Provider
    • v1.0.0
  • nShield Security World
  • nShield Connect v12.81 User Guide (Windows)
  • Product returns
View guide as PDF
v13.6.11 v13.7.3 v13.5.1 v13.4.5 v13.3 v13.2.4 v12.81 v12.80 v12.72.4 v12.50.4 v12.40
Email the nShield docs team

Product returns

If you need to return your nShield Connect product, contact Support for instructions:

https://nshieldsupport.entrust.com.

©2025 Entrust Corporation. All rights reserved.

This website was last updated on