SNMP monitoring agent

This appendix describes the Simple Network Management Protocol (SNMP) monitoring agent. The SNMP monitoring agent provides you with components that you can add to your (third-party) SNMP manager application.

SNMP was developed in 1988 and revised in 1996. It is currently regarded as the standard method of network management. It is widely supported and offers greater interoperability than traditional network management tools (for example, rsh or netstat). This makes it ideal for use for the large array of platforms that we support and also avoids the overhead of remote login and execution, helping to reduce network congestion and improve performance.

SNMP defines a collection of network management functions allowing management stations to gather information from, and transmit commands to, remote machines on the network. Agents running on the remote machines can take information gathered from the system and relay this information to the manager application. Such information is either requested from the underlying operating system or gained by interrogating the hardware.

Every SNMP manager adds monitor components differently. Consult the documentation supplied with your SNMP Manager application for details on how to add the MIB files.

SNMP defines the following SNMP messages:

Message Description

Message	Description
`get`	This message is sent by a manager to retrieve the value of an object at the agent.
`set`	This message is sent by a manager to set the value of an object at the agent.
`trap`	This message is sent by an agent to notify a management station of significant events.

get

This message is sent by a manager to retrieve the value of an object at the agent.

set

This message is sent by a manager to set the value of an object at the agent.

trap

This message is sent by an agent to notify a management station of significant events.

The SNMP monitoring agent is based on the open-source Net-SNMP project, version 5.7.3. More information on SNMP in general, and the data structures used to support SNMP installations, is available from the NET-SNMP project Web site: https://net-snmp.sourceforge.io/.

This site includes some support information and offers access to discussion e-mail lists. You can use the discussion lists to monitor subjects that might affect the operation or security of the SNMP agent or command-line utilities.

Discuss any enquiries arising from information on the NET-SNMP Web site with Support before posting potentially sensitive information to the NET-SNMP Web site.

Installing the SNMP agent

The SNMP agent is installed with the installation of the Security World Software and starts automatically.

Default installation settings

When installing Security World Software, you may be prompted to select Security World Software components from a list. If you select all components, then the SNMP agent is installed as part of a full Security World Software installation. The default installation directory for the nShield Management Information Base (MIB) and the SNMP configuration files (snmp.conf and snmpd.conf) is /opt/nfast/etc/snmp/.

Do you already have an SNMP agent running?

If you already have another SNMP agent running, you must configure the ports used by the agents in order to avoid conflicts before enabling the SNMP agent. A port is assigned by editing the agentaddress entry in the snmpd.conf file or by editing the defaultPort entry in snmpd.conf file. If both files have been edited, the agentaddress entry is snmpd.conf file takes priority for snmpd, and the defaultPort entry in snmpd.conf is ignored.

If no existing SNMP agent is found, the SNMP agent runs on the default port 161. If an existing SNMP agent is detected, and no SNMP agent configuration files are found (implying a fresh installation), the installer automatically configures the SNMP agent to use the first unused port above 161 by creating a new snmpd.conf configuration file with the appropriate directive. It then displays a message indicating the number of the port that is has selected.

If an existing SNMP agent is found and an existing SNMP agent installation exists, the installer checks the existing configuration files for an appropriate directive and warns you if one does not exist. If you need to edit these configuration files yourself, a port is assigned by editing the agentaddress entry in snmpd.conf file or editing the defaultPort entry in snmpd.conf file. If both files have been edited, the agentaddress entry in snmpd.conf file takes priority for snmpd, and the defaultPort entry in snmpd.conf is ignored.

Starting the SNMP agent

The SNMP agent is started automatically however it can be stopped and started manually. To stop, start, or restart (stop and immediately start again) the SNMP daemon:

/etc/init.d/nc_ncsnmpd stop|start|restart

See The SNMP configuration file: snmp.conf for more information on additional parameters accepted by snmpd.

Basic configuration

Protecting the SNMP installation

The SNMP agent allows other computers on the network to connect to it and make requests for information. The SNMP agent is based on the NET-SNMP code base, which has been tested but not fully reviewed by Entrust. We strongly recommend that you deploy the SNMP agent only on a private network or a network protected from the global Internet by appropriate network protection systems (e.g. a firewall, a network Intrusion Detection/Prevention System, etc.).

The default nShield SNMP installation allows read-only access to the Management Information Base (MIB). There is no default write access to any part of the MIB.

Every effort has been taken to ensure the confidentiality of cryptographic keys even when the SNMP agent is enabled. In particular, the nShield module is designed to prevent the theft of keys even if the security of the host system is compromised, provided that the Administrator Cards are used only with trusted hosts. Care must be used when changing the configuration of the SNMP agent.

We strongly advise that you use the SNMP User-based Security Model (USM) with Authentication and Privacy protocols selected, to ensure only authorised users can obtain information from the SNMP agent and the confidentiality and data integrity of the transferred information is protected.

Care has also been taken to ensure that malicious attackers are unable to inundate your module with requests by flooding your SNMP agent. Command results from administration or statistics commands are cached, and thus the maximum rate at which the SNMP agent sends commands to the module is throttled. For more information on setting the cache time-outs. see The SNMP configuration file: snmp.conf.

Configuring the SNMP agent

The Security World Software package uses various configuration files to configure its applications. This section describes the overall nature of the configuration files for the SNMP agent.

If you are installing the SNMP agent to a host that has an existing SNMP agent installation, you may need to edit the SNMP configuration files (snmpd.conf and snmp.conf) associated with the SNMP agent to change the port on which the agent listens for SNMP requests. For more information, see Do you already have an SNMP agent running?.

Make sure you protect access to the configuration files, since these contain information that defines the security parameters of the SNMP system.

By default, the SNMP configuration files are located in the /opt/nfast/etc/snmp/ directory.

Re-reading SNMP configuration files

The SNMP agent reads its configuration files on startup, and any changes made after this point will have no effect. If new directives are added and need to be applied, the SNMP agent can be forced to re-read its configuration files with:

An snmp set of integer(1) to enterprises.nCipher.reloadConfig.0(.1.3.6.1.4.1.7682.999.0)
kill -HUP signal sent to the snmpd agent process
stop then restart the SNMP agent.

The SNMP configuration file: snmp.conf

The snmp.conf configuration file contains directives that apply to all SNMP applications. These directives can be configured to apply to specific applications. The snmp.conf configuration file is not required for the agent to operate and report MIB entries.

The SNMP agent configuration file: snmpd.conf

The snmpd.conf configuration file defines how the SNMP agent operates. It is required only if an agent is running.

The snmpd.conf file can contain any of the directives available for use in the snmp.conf file and may also contain the following Security World Software-specific directives:

Directive Description

Directive	Description
`statstimeout`	This directive specifies the length of time for which statistics commands are cached. The default is 5 seconds.
`admintimeout`	This directive specifies the length of time for which administrative commands are cached. The default is 60 seconds.
`keytable`	This directive sets the initial state of the key table to `none`, `all`, or `query`. See `listKeys` in Administration sub-tree overview.
`enable_trap_zero_suffix`	This directive appends the '.0' suffix to object identifiers (OIDs) for backward compatibility. The default is `0` (disabled): the directive can be set to `1` to restore the suffix. Valid values are 0 and 1.
`memoryUsageOkThreshold`	This directive specifies the threshold (as a percentage) below which HSM memory usage is considered to be ok. The default is 0. See Memory usage monitoring for more details.
`memoryUsageHighThreshold`	This directive specifies the threshold (as a percentage) at which HSM memory usage is considered to be too high. The default is 0. See Memory usage monitoring for more details.

statstimeout

This directive specifies the length of time for which statistics commands are cached. The default is 5 seconds.

admintimeout

This directive specifies the length of time for which administrative commands are cached. The default is 60 seconds.

keytable

This directive sets the initial state of the key table to none, all, or query. See listKeys in Administration sub-tree overview.

enable_trap_zero_suffix

This directive appends the '.0' suffix to object identifiers (OIDs) for backward compatibility. The default is 0 (disabled): the directive can be set to 1 to restore the suffix. Valid values are 0 and 1.

memoryUsageOkThreshold

This directive specifies the threshold (as a percentage) below which HSM memory usage is considered to be ok. The default is 0. See Memory usage monitoring for more details.

memoryUsageHighThreshold

This directive specifies the threshold (as a percentage) at which HSM memory usage is considered to be too high. The default is 0. See Memory usage monitoring for more details.

There may be a tolerance gap between the memoryUsageOkThreshold and the memoryUsageHighThreshold values.

The timeouts should be set to values that achieve a balance between recieving up to date information whilst preventing excessive load.

The SNMP agent persistent configuration file

On running the SNMP agent for the first time, the persist directory will be created. This contains configuration files that are maintained by the SNMP agent. This directory will be created in the following location:

/opt/nfast/etc/snmp/persist

Modifications should only be made to the persist folder’s snmp.conf file in order to create users. The files within this directory should otherwise only be managed by the SNMP agent itself.

User creation con be performed with the createUser directive. See USM users. On initialization of the agent the information is read from the file and the lines are removed (eliminating the storage of the master password for that user) and replaced with the key that is derived from it. This key is a localised key, so that unlike the password, if it is stolen it can not be used to access other agents.

Do not modify the persistent snmpd.conf file while the agent is running. The file is only read on initialization of the agent and it is overwritten when the SNMP agent terminates. Any changes made to this file while the SNMP agent directives is running will be lost. The SNMP agent should be stopped prior to adding createUser directories to the configuration file.

Agent Behaviour

There are a small number of directives that control the behaviour of the SNMP Agent when considering it as a daemon providing a network service.

agentaddress directive

The listening address(es) that the SNMP Agent will use are defined by the agentaddress directive. It takes a comma separated list of address specifiers where an address specifier consists of one or more of:

a transport specifier udp: or tcp
a hostname or IPv4 address
a port number (e.g. :161 or :1161).

The default behaviour is to listen on UDP port 161 on all IPv4 interfaces (i.e. equivalent to udp:161).

agentaddress localhost : 161,tcp:1161

agentaddress will listen on UDP port 161, but only on the loopback interface (the port specification ":161" is not strictly necessary as this is the default port). It will also listen on TCP port 1161 on all IPv4 interfaces.

agentgroup and agentuser directives

The user and group that the SNMP Agent changes to after opening the listening port(s) are defined using the agentgroup and agentuser directives. The following must be used:

agentgroup ncsnmpd
agentuser ncsnmpd

System information

Most of the scalar objects in the .iso.org.dod.internet.mgmt.mib-2.system sub-tree can be configured.

sysLocation STRING
sysContact STRING
sysName STRING

The three directives above set the system location, contact or name for the SNMP Agent respectively. Ordinarily these objects are writable via a suitably authorised SNMP SET request, however, specifying one of these directives in the configuration file makes the corresponding object read-only.

sysServices INTEGER

Sets the value of the sysService.0 object. RFC1213 defines how the integer value is calculated.

sysDescr STRING
sysObjectID OID

The two directives above set the system description and object ID for the agent. These objects are not SNMP-writable, but these directives can be used by a network administrator to configure suitable values for them.

USM users

The SNMPv3 protocol supports a User based Security Model as defined in RFC-3414. USM provides authentication and privacy (encryption) functions and operates at the message level allowing for the following security level to be used with SNMPv3:

Communication without authentication and privacy (noauth)
Communication with authentication and without privacy (auth)
Communication with authentication and privacy (priv).

Within this document the three possible security levels are referred to as noauth, auth and priv. However, other forms are sometimes used within the NET-SNMP and the equivalents are:

Security level Equivalents

Security level	Equivalents
`noauth`	`noauthnopriv`
`auth`	`authnopriv`
`priv`	`authpriv`

noauth

noauthnopriv

auth

authnopriv

priv

authpriv

Users can be added to the SNMP configuration with the createUser directive, defining the security mechanisms to be used.

createUser [-e ENGINEID] username [SHA authpass phrase] [AES privpass phrase]

It would not normally be necessary to specify the engine ID, but if it is specified, ENGINEID is defined as a hexadecimal string of octets starting with the 0x prefix. The encoding of the engine ID is defined in the description of SnmpEngineID from RFC3411. The following recommendations should be followed when defining the security parameters for SNMPv3:

Select a 'Security Level' of Priv, (authpriv) or auth (authNoPriv).
- Priv is the preferred 'Security Level', since this will provide both data source authentication and confidentially protection for the SNMP messages.
- auth is the minimum 'Security Level' that should be selected, since this will ensure that SNMP data sent/received has not been tampered with and has been sent from an authorised entity.
Define separate authpass phrase and privpass phrase.
- It is good security practice to have key separation.
Use randomly generated pass phrases which contain upper and lower case characters, numbers and symbols (e.g. ASCII characters 0x20 - 0x7E).
- This should give an entropy per character of 6.57bits,
Use either 15 char for 96 bits of security strength keys and 20 char for 128 bits security strength keys.
- The minimum length of both auth and priv pass phrases is eight characters.
- If a random pass phrase is not used, consult NIST SP800-63-2 - Appendix A to determine the security strength of the password and the resultant keys. See https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-63-2.pdf.

MD5 and DES are not supported or enabled in the nShield distribution of SNMP. Only SHA may be used for authentication, and only AES may be used for privacy (encryption).

It is strongly recommended that createUser directives be added to the persist/snmpd.conf file, so that the pass phrases are not available after the SNMP agent is installed. See USM users. The user can then be referenced in access control directives(s) after which it can be used.

Traditional access control

Most simple access control requirements can be specified using the directives rouser/rwuser (for SNMPv3) or rocommunity/rwcommunity (for SNMPv1 or SNMPv2c).

rouser [-s usm] USERNAME [noauth | auth | priv [OID | -V VIEW [CONTEXT]]
rwuser [-s usm] USERNAME [noath | auth | priv [OID | -V VIEW [CONTEXT]]

These directives specify that an SNMPv3 user (USERNAME) will be allowed read-only or read-write access respectively. The default (unspecified) security level is auth, which is the recommended minimum security level (see above). It is not recommended to use the usm security level noauth, where all SNMP messages are unauthenticated and any tampering of the message cannot be detected. Using noauth will reduce the security of the SNMP messages to the level of SNMPv1 or SNMPv2c.

OID restricts access for that user to the subtree rooted at the given OID.

VIEW restricts access for that user to the specified View-based Access Control Model (VACM) view name. An optional context can also be specified, or context to denote a context prefix. If no context field is specified (or the token * is used), the directive will match all possible contexts. (Contexts are a mechanism within SNMPv3 whereby an agent can support parallel versions of the same MIB objects, referring to different underlying data sets.)

A security model can be specified with -s SECMODEL however the default security model usm is the only security model which is supported in the nShield distribution of SNMP.

Example:

Read-only user with access to the full OID tree requiring authentication as a minimum:
```
rouser userl
```
Or
```
rouser -s usm user1 auth .1
```
Read-only user with access to the nShield MIB allowing unauthenticated requests:
```
rouser user2 noauth .1.3.6.1.4.1.7682
```
Read-write user with access to the full OID tree requiring authentication as a minimum:
```
rwuser user3
```
Or
```
rwuser user3 auth .iso
```
Read-write user with access to the snmpVacmMIB subtree requiring authentication and encryption:
```
rwuser user4 priv snmpVacmMIB
```
Or
```
rwuser user4 priv .1.3.6.1.6.3.16
```

rocommunity COMMUNITY [SOURCE [ OID | -V VIEW [CONTEXT]]
rwcommunity COMMUNITY [SOURCE [ OID | -V VIEW [CONTEXT]]

Specifies an SNMPv1 or SNMPv2c community that will be allowed read-only (GET and GETNEXT) or read-write (GET, GETNEXT and SET) access respectively. By default, this will provide access to the full OID tree for such requests, regardless of where they were sent from. SOURCE allows access either from a particular range of source addresses, or globally (default). A restricted source can either be a specific hostname or address (e.g. localhost or 127.0.01), or a subnet - represented as IP/MASK (e.g. 10.10.10.0/255.255.255.0), or IP/BITS (e.g. 10.10.10.0/24).

OID VIEW and CONTEXT are as defined for rouser and rwuser.

Example:

Setting up a read-only community named public that can be accessed by any user with the community name:
```
rocommmunity public
```
Setting up a read/write community named private that can only be accessed from the machine on which the agent is running:
```
rocommmunity private localhost
```

In each case, only one directive should be specified for a given SNMPv3 user, or community string. It is not appropriate to specify both rouser and rwuser directives referring to the same SNMPv3 user (or equivalent community settings). The rwuser directive provides all the access of rouser (as well as allowing SET support). The same applies to rwcommunity and rocommunity.

More complex access requirements (such as access to two or more distinct OID subtrees, or different views for GET and SET requests) should use VACM configuration directives.

VACM configuration

The full flexibility of the VACM, for example allowing access to two or more distinct OID subtrees, or different access requirements for reading and writing, is available using four configuration directives - com2sec, group, view and access. The directives essentially define who has access and what they have access to using four directives. The first two directives (comsec2sec and group) define the who, while the last two (view and access) define the what.

Com2sec [-Cn CONTEXT] SECNAME SOURCE COMMUNITY

Maps an SNMPv1 or SNMPv2c community string to a security name. As it defines the community and maps it to a security name, rocommunity/rwcommunity directives are not required when using the directive.

SECNAME is the security name to be defined.

SOURCE is as defined for the rocommunity/rwcommunity directives above.

COMMUNITY defines the community name to be mapped to the security name. The same community string can be specified in several separate directives with different source tokens, and the first source/community combination that matches the incoming request will be selected. Various source/community combinations can also map to the same security name.

CONTEXT if defined (using -Cn), means that the community string will be mapped to a security name in the named SNMPv3 context. Otherwise the default context ("") will be used.

Example:

Creating three SNMPv1/v2c community names (private, public and ltd), where private and ltd only allow requests from the machine on which the SNMP Agent is running (note lines beginning with a # in snmpd.conf are treated as comments):

#         [-Cn CONTEXT] SECNAME     SOURCE    COMMUNITY
com2sec   “”            sec_private localhost private
com2sec                 sec_public  default   public
com2sec                 sec_limited localhost ltd

group GROUP v1 | v2c | usm SECNAME

Maps a security name (in the specified security model) into a named group. Several group directives can specify the same group name, allowing a single access setting to apply to several users and /or community strings. Note that groups must be set up for the two community-based models separately - a single com2sec directive will typically be accompanied by two group directives.

GROUP is the group name being defined/added to v1, v2c or usm defines the security model to which the definition relates SECNAME is the security (USM user name or security name defined by com2sec to be added to the group.

Example:

Creating three groups (grp_private, grp_public, grp_limited) for three USM users (user1, user2 and user3) and the three communities shown in the com2sec example above:

# GROUP v1|v2c|usm SECNAME
Ggroup grp_private v1 sec_private
group grp_private v2c sec_private
group grp_private usm user1

group grp_public v1 sec_public
group grp_public v2c sec_public
group grp_public usm user2

group grp_limited v1 sec_limited
group grp_limited v2c sec_limited
group grp_limited usm user3

view VNAME included | excluded OID [MASK]

Defines a named view - a subset of the overall OID tree. This is most commonly a single subtree, but several view directives can be given with the same view name (VNAME), to build up a more complex collection of OIDs. An optional mask can also be specified, providing a means of indicating which parts of the OID must be matched.

VNAME is the view being modified.

included | excluded allows you to define whether the view includes or excludes the subtree, allowing the definition of a more complex view (e.g. by excluding certain sensitive objects from an otherwise accessible subtree).

MASK is an optional list of hex octets (separated by '.' or ':') whose bits indicate which OID sub-identifiers to match against. So for example if we assume we have on OID with 11 sub-identifiers (.1.3.6.1.x.y.z.table.entry.column.1) where the last four relate to a table, an entry, a column and index 1, specifying a MASK value of " FF.A0 " (i.e. 1111111110100000) maps to this OID as follows:

.3.6.1.x.y.z.table.entry.column.1
1 1 1 1 1 1 1   1     1     0    1

i.e. this mask means all parts of the OID except the column must match, therefore defining a view to any column of the first row of the table.

By including and excluding various aspects of the full OID tree, it is possible to define fine grained visibility within a view’s definition.

Example:

Creating five views where vw_sysContact only has access to the system.sysContact.0 OID, vw_nCipher only has access to the MIB, vw_global has access to the full OID tree, vw_nCipher_stats only has access to nCipher.nC-series.statistics and vw_nCipher_admin only has access to nCipher.nC-series.administration:

#     VNAME             included|excluded   OID                                       [MASK]
view  vw_sysContact     excluded            .1
view  vw_sysContact     included            system.sysContact.0                       FF.80

view  vw_nCipher        excluded            .iso
view  vw_nCipher        included            .1.3.6.1.4.1.7682

view  vw_global         included            .1

view  vw_nCipher_stats  excluded            .1
view  vw_nCipher_stats  included            enterprises.nCipher.nC-series.statistics

view  vw_nCipher_admin  excluded            .1
view  vw_nCipher_admin  included            enterprises.nCipher.nC-series.administration

access GROUP CONTEXT any | v1 | v2c | usm noauth | auth | priv exact | prefix READ WRITE NOTIFY

Maps from a group of users/communities (with a particular security model and minimum security level, and specific context) to one of three views, depending on the request being processed.

GROUP is a group name defined by the group directive and specifies the group that access is being defined for.

CONTEXT specifies the context for the access (the default context is the empty string ""). The context of incoming requests must match against the context either exactly or by prefix, as specified by the choice of exact | prefix made in this directive.

any, v1, v2c, or usm define the security model to which this definition relates.

noauth | auth | priv define the security level to which this definition relates. For v1 or v2c access, this will need to be noauth as these protocols do not support authentication.

exact | prefix specify how CONTEXT should be matched against the context of the incoming request, either an exact match to CONTEXT, or prefixed by CONTEXT.

READ, WRITE and NOTIFY specifies the view to be used for GET*, SET and TRAP/INFORM requests (although the NOTIFY view is not currently used). The keyword none is used if there is to be no access for that type of request.

Example:

Specifying that:

SNMPv1 requests using the public community only have read access to the enterprises.nCipher.nC-series.statistics subtree,
SNMPv2c requests using the public community only have read access to the enterprises.nCipher.nC-series.administration.subtree,
SNMPv3 requests using the user2 USM user, must as a minimum be authenticated, and have read, notify access to the nCipher MIB (i.e. enterprises nCipher)
SNMPv3 requests using the user1 USM user, must as a minimum be authenticated and encrypted, and have read, write and notify access to the full OID tree. Note that since requests must be authenticated and encrypted as a minimum, SNMPv1 and v2c requests using the private community cannot be made even though the community is included in grp_private.
SNMPv1 and SNMPv2 requests using the ltd community and SNMPv3 requests using the user3 USM user, do not require to be authenticated or encrypted, and have read, write access to the system.sysContact.0 OID.

#      GROUP       CONTEXT  SECMODEL  LEVEL      PREFIX  READ              WRITE     NOTIFY
access grp_public  ""       v1        noauth     exact   vw_nCipher_stats  none      none
access grp_public  ""       v2c       noauth     exact   vw_nCipher_admin  none      none
access grp_public  ""       usm       auth       exact   vw_nCipher        none      vw_nCipher
access grp_private ""       any       priv       exact   vw_global         vw_global                                                                                              vw_global
access grp_limited ""       any       noauth     exact   vw_sysContact     vw_sysContact                                                                                          none

Trap Configuration

The distribution of SNMP supports SNMPv1, SNMPv2 and SNMPv3 traps. Control over these traps is defined with a number of directives:

SNMPv1 and SNMPv2 traps

trapcommunity COMMUNITY

Defines the default community to be used when sending SNMPv1 or SNMPv2 traps. Note that this directive must be used prior to a trapsink or trap2sink directive that wishes to use this community.

COMMUNITY the community name to be used.

Example:

trapcommunity traps

trapsink HOST [COMMUNITY [PORT]]
trap2sink HOST [COMMUNITY [PORT]]

Defines a destination for SNMPv1 or SNMPv2 traps generated by the agent.

HOST is an address specifier defining the network target that traps will be sent to. It consists of an optional transport specifier (udp (default if not specified) or tcp) followed by a hostname or IPv4 address followed by an optional port number, deliminated by colons ":". (e.g. localhost or tcp:192.168.137.2:163).

COMMUNITY if specified will be the community name used for the traps. If it is not specified, the most recently specified trapcommunity will be used.

PORT allows for port-number to be defined if it is not present as part of the HOST specification. If no port is defined, the default port number of 162 will be used.

When a TCP transport specifier is used the SNMP agent establishes the TCP connection with the trap manager at start-up. Therefore the trap manger must be started before the SNMP agent otherwise an error is reported for the line in the snmpd.conf file which defines the trap manager.

Likewise when the TCP connection between the SNMP agent and the trap manager is dropped, traps are lost. Therefore it is inadvisable to use TCP instead of UDP for the transport specifier of trap managers.

If TCP is used for the connection between the SNMP agent and the trap manager and the connection is lost, to re-establish the connection the SNMP agent must be restarted, with the trap manager running and able to accept a TCP connection from the SNMP agent.

For issues with the trap manager accepting TCP connections from a SNMP agent refer to trap manager documentation.

Example:

trap2sink udp:192.168.137.220:162 traps

SNMPv3 traps

trapsess [SNMPCMD_ARGS]  HOST

Defines the configuration for a trap. This is the only way to define SNMPv3 traps and it is an alternative method for defining SNMPv1 and SNMPv2 traps.

SNMPCMD_ARGS are arguments that would be used for an equivalent snmptrap command. So for example to send an SNMPv3 trap as USM user user1 with authentication and encryption, the value -v3 -u user1 -1 priv would be used.

HOST see host definition for trap2sink above.

Example:

trapsess -v3 -u user1 -1 priv udp:192.168.137.220:162
trapsess -v2c -c public 192.168.137.221:162

Using the SNMP agent with a manager application

The nShield SNMP monitoring agent provides MIB files that can be added to your (third-party) SNMP manager application.

Manager configuration

The manager application is the interface through which the user is able to perform network management functions. A manager communicates with agents using SNMP primitives (get, set, trap) and is unaware of how data is retrieved from, and sent to, managed devices. This form of encapsulation creates the following:

The manager is hidden from all platform specific details
The manager can communicate with agents running on any IP-addressable machine.

As a consequence, manager applications are generic and can be bought off the shelf. You may already be running SNMP managers, and if so, you can use them to query the SNMP agent.

The manager is initially unaware of the MIB tree structure at a particular node. Managed objects can be retrieved or modified, but only if their location in the tree is known.

It is more useful if the manager can see the MIB tree present at each managed node. The MIB module descriptions for a particular node must be parsed by a manager-specific MIB compiler and converted to configuration files. These files are read by the manager application at run time.

The SNMP agent is designed to monitor all current nShield modules, working with all supported versions of nShield firmware (contact Support for details of supported firmware).

MIB module overview

A large proportion of the SNMP system is fully specified by the structure of the MIB; the behavior of the agent depends on relaying information according to the layout of the MIB.

The MIB module resides at a registered location in the MIB tree determined by the Internet Assigned Numbers Authority (IANA). The private enterprise number of 7682 designated by the IANA corresponds to the root of the branch, and by convention this (internal) node is the company name.

The MIB module groups logically related data together, organizing itself into a classification tree, with managed objects present at leaf nodes. The nC-series node (enterprises.nCipher.nC‑series) is placed as a sub-tree of the root (enterprises.nCipher); this allows future product lines to be added as additional sub-trees. The structure of the tree underneath the registered location is vendor-defined, and this specification defines the structure chosen to represent Security World Software-specific data.

The MIB file can be found in the following location:

/opt/nfast/etc/snmp/mibs/ncipher-mib.txt

MIB functionality

The MIB module separates module information into the following categories:

Retrieval of status and information about installed nC-series modules
Retrieval of live statistics of performance of installed nC-series modules

These categories form the top-level nodes of the sub-tree; the functionality of the first category is in the administration sub-tree, and the second category is in the statistics sub-tree. The top-level tree also contains three items that it would be useful to check at-a-glance:

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`hardserverFailed`	R	TruthValue	`True` if the remote hardserver is not running. If the hardserver is not running, then most of the rest of the information is unreliable or missing.
`modulesFailed`	R	TruthValue	`True` if any modules have failed.
`load`	R	Unsigned32	Percentage of total available capacity currently utilized.

hardserverFailed

TruthValue

True if the remote hardserver is not running. If the hardserver is not running, then most of the rest of the information is unreliable or missing.

modulesFailed

TruthValue

True if any modules have failed.

load

Unsigned32

Percentage of total available capacity currently utilized.

Traps

The traps sub-tree (enterprises.nCipher.nC-series.nC-traps) contains traps that the SNMP agent sends when certain events occur. For details on configuring traps, see USM users.

The following table gives details of the individual traps:

Node name Description

Node name	Description
`hardserverAlert`	This trap is sent when the hardserver fails or is shut down.
`hardserverUnAlert`	This trap is sent when the hardserver restarts.
`moduleAlert`	This trap is sent when a module fails.
`moduleUnAlert`	This trap is sent when a module is restarted after a failure.
`psuAlert`	This trap is sent when a PSU fails.
`psuUnAlert`	This trap is sent when a previously-failed PSU is working again.
`fanfailureAlert`	This trap is sent when a fan fails.
`fanfailureUnAlert`	This trap is sent when a previously-failed fan is working again.
`memoryUsageHighAlert`	This trap is sent when the HSM memory usage high threshold has been reached or exceeded by an HSM. See section on Memory usage monitoring below for more details.
`memoryUsageOkAlert`	This trap is sent when the memory usage for an HSM falls below the HSM memory usage ok threshold. See section on Memory usage monitoring below for more details.

hardserverAlert

This trap is sent when the hardserver fails or is shut down.

hardserverUnAlert

This trap is sent when the hardserver restarts.

moduleAlert

This trap is sent when a module fails.

moduleUnAlert

This trap is sent when a module is restarted after a failure.

psuAlert

This trap is sent when a PSU fails.

psuUnAlert

This trap is sent when a previously-failed PSU is working again.

fanfailureAlert

This trap is sent when a fan fails.

fanfailureUnAlert

This trap is sent when a previously-failed fan is working again.

memoryUsageHighAlert

This trap is sent when the HSM memory usage high threshold has been reached or exceeded by an HSM. See section on Memory usage monitoring below for more details.

memoryUsageOkAlert

This trap is sent when the memory usage for an HSM falls below the HSM memory usage ok threshold. See section on Memory usage monitoring below for more details.

Some traps can take up to five minutes to be received.

Other generic Net-SNMP traps may also be received. These include the two below, see Net-SNMP project website for more details.

Net-SNMP trap name Description

Net-SNMP trap name	Description
`SNMPv2-MIB::coldStart`	This trap is sent when the SNMP agent is started
`NET-SNMP-AGENT-MIB::nsNotifyShutdown`	This trap is sent when the SNMP agent is stopped

SNMPv2-MIB::coldStart

This trap is sent when the SNMP agent is started

NET-SNMP-AGENT-MIB::nsNotifyShutdown

This trap is sent when the SNMP agent is stopped

Memory usage monitoring

The HSM memory usage thresholds and memory usage traps provide a mechanism to monitor HSM memory usage for HSMs in which the SNMP agent’s client computer are enrolled.

With memory usage monitoring enabled, there will be a memoryUsageHighAlert trap sent each time the currently in-use memoryUsageHighThreshold is reached or exceeded by an HSM.

With memory usage monitoring enabled, a memoryUsageHighAlert trap is also sent:

If the SNMP agent starts up and recognises that there are HSMs in a high memory usage state or,
If HSMs in a high memory usage state are enrolled or,
If the SNMP agent loses and then re-gains contact with the local hardserver which is connected to HSMs in a high memory usage state or,
If failed HSMs in a high memory usage state then recover.

For each of the four scenarios above, one memoryUsageHighAlert trap will be sent for each HSM in a high memory usage state.

With memory usage monitoring enabled, there will be a memoryUsageOkAlert trap sent each time the memory usage for an HSM falls below the currently in-use memoryUsageOkThreshold.

The value for memoryUsageOkThreshold is read from the snmpd.conf file on starting the SNMP agent and is used provided it contains an integer value in the range 0 to 100 (inclusive); otherwise, the default value of 0 is used. The value for memoryUsageHighThreshold is processed in the same way.

Memory usage monitoring is enabled unless the in-use values for memoryUsageOkThreshold and memoryUsageHighThreshold are both 0 or the in-use values are such that memoryUsageOkThreshold > memoryUsageHighThreshold.

For example, in snmpd.conf, if memoryUsageOkThreshold is assigned an invalid value and memoryUsageHighThreshold is assigned a valid value of say 75%, then memory usage monitoring will be enabled and the values 0% and 75% will be used respectively.

An example of memory usage monitoring by an SNMP agent on a client computer enrolled with 2 HSMs is given below:

Administration sub-tree overview

The administration sub-tree (enterprises.nCipher.nC‑series.administration) contains information about the permanent state of the hardserver and the connected modules. It is likely that most of the information in this branch rarely changes over time, unlike the statistics branch. The information given in the administration sub-tree is mostly acquired by the NewEnquiry command and is supplied both per-module and (where appropriate) aggregated over all modules.

The following table gives details of the individual nodes in the administration sub-tree:

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`hardserverRunning`	R	Enum 1: Running 2: NotRunning	This variable reflects the current state of the hardserver (`Running` or `NotRunning`).
`noOfModules`	R	Gauge32	Number of nC-series modules.
`hsVersion`	R	DisplayString	Hardserver version string.
`globalSpeedIndex`	R	Gauge32	Number of 1024-bit signatures each second.
`globalminQ`	R	Gauge32	Minimum recommended queue.
`globalmaxQ`	R	Gauge32	Maximum recommended queue.
`SecurityWorld`	R	TruthValue	`True` if a Security World is installed and operational.
`swState`	R	DisplayString	Security World display flags, as reported by `nfkminfo`.
`listKeys`	R/W	Integer 1: none 2: all 3: query 4: resetquery	Controls the behavior of the key table (switch off, display all keys, enable individual attribute queries, clear the query fields). Displaying all keys can result in a very long list.
`serverFlags`	R	DisplayString	Supported hardserver facilities (the `NewEnquiry` level 4 flags).
`remoteServerPort`	R	Gauge32	TCP port on which the hardserver is listening.
`swGenTime`	R	DisplayString	Security World’s generation time.
`swGeneratingESN`	R	DisplayString	ESN of the module that generated the Security World.

hardserverRunning

Enum

1: Running

2: NotRunning

This variable reflects the current state of the hardserver (Running or NotRunning).

noOfModules

Gauge32

Number of nC-series modules.

hsVersion

DisplayString

Hardserver version string.

globalSpeedIndex

Gauge32

Number of 1024-bit signatures each second.

globalminQ

Gauge32

Minimum recommended queue.

globalmaxQ

Gauge32

Maximum recommended queue.

SecurityWorld

TruthValue

True if a Security World is installed and operational.

swState

DisplayString

Security World display flags, as reported by nfkminfo.

listKeys

R/W

Integer

1: none

2: all

3: query

4: resetquery

Controls the behavior of the key table (switch off, display all keys, enable individual attribute queries, clear the query fields). Displaying all keys can result in a very long list.

serverFlags

DisplayString

Supported hardserver facilities (the NewEnquiry level 4 flags).

remoteServerPort

Gauge32

TCP port on which the hardserver is listening.

swGenTime

DisplayString

Security World’s generation time.

swGeneratingESN

DisplayString

ESN of the module that generated the Security World.

listKeys can be preset using the keytable config directive in snmpd.conf file (see The SNMP configuration file: snmp.conf).

Security World hash sub-tree

The following table gives details of the nodes in the Security World hash sub-tree (enterprises.nCipher.nC‑series.administration.swHashes):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`hashKNSO`	R	MHash	Hash of the Security Officer’s key.
`hashKM`	R	MHash	Hash of the Security World key.
`hashKRA`	R	MHash	Hash of the recovery authorization key.
`hashKRE`	R	MHash	Hash of the recovery key pair.
`hashKFIPS`	R	MHash	Hash of the FIPS authorization key.
`hashKMC`	R	MHash	Hash of the module certification key.
`hashKP`	R	MHash	Hash of the pass phrase replacement key.
`hashKNV`	R	MHash	Hash of the nonvolatile memory (NVRAM) authorization key.
`hashKRTC`	R	MHash	Hash of the Real Time Clock authorization key.
`hashKDSEE`	R	MHash	Hash of the SEE Debugging authorization key.
`hashKFTO`	R	MHash	Hash of the Foreign Token Open authorization key.

hashKNSO

MHash

Hash of the Security Officer’s key.

hashKM

MHash

Hash of the Security World key.

hashKRA

MHash

Hash of the recovery authorization key.

hashKRE

MHash

Hash of the recovery key pair.

hashKFIPS

MHash

Hash of the FIPS authorization key.

hashKMC

MHash

Hash of the module certification key.

hashKP

MHash

Hash of the pass phrase replacement key.

hashKNV

MHash

Hash of the nonvolatile memory (NVRAM) authorization key.

hashKRTC

MHash

Hash of the Real Time Clock authorization key.

hashKDSEE

MHash

Hash of the SEE Debugging authorization key.

hashKFTO

MHash

Hash of the Foreign Token Open authorization key.

Security World quorums sub-tree

The following table gives details of the nodes in the Security World quorums sub-tree (enterprises.nCipher.nC‑series.administration.swQuorums):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`adminQuorumK`	R	Gauge32	The default quorum of Administrator cards.
`adminQuorumN`	R	Gauge32	The total number of cards in the ACS.
`adminQuorumM`	R	Gauge32	The quorum required for module reprogramming.
`adminQuorumR`	R	Gauge32	The quorum required to transfer keys for OCS replacement.
`adminQuorumP`	R	Gauge32	The quorum required to recover the pass phrase for an Operator card.
`adminQuorumNV`	R	Gauge32	The quorum required to access nonvolatile memory (NVRAM).
`adminQuorumRTC`	R	Gauge32	The quorum required to update the Real Time Clock.
`adminQuorumDSEE`	R	Gauge32	The quorum required to view full SEE debug information.
`adminQuorumFTO`	R	Gauge32	The quorum required to use a Foreign Token Open Delegate Key.

adminQuorumK

Gauge32

The default quorum of Administrator cards.

adminQuorumN

Gauge32

The total number of cards in the ACS.

adminQuorumM

Gauge32

The quorum required for module reprogramming.

adminQuorumR

Gauge32

The quorum required to transfer keys for OCS replacement.

adminQuorumP

Gauge32

The quorum required to recover the pass phrase for an Operator card.

adminQuorumNV

Gauge32

The quorum required to access nonvolatile memory (NVRAM).

adminQuorumRTC

Gauge32

The quorum required to update the Real Time Clock.

adminQuorumDSEE

Gauge32

The quorum required to view full SEE debug information.

adminQuorumFTO

Gauge32

The quorum required to use a Foreign Token Open Delegate Key.

Module administration table

The following table gives details of the nodes in the module administration table (enterprises.nCipher.nC‑series.administration.moduleAdminTable):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`moduleAdminIndex`	R	Gauge32	Module number of this row in the table.
`mode`	R	Integer 1: Operational 2: Pre-init 3: Init 4: Pre-maint 5: Maint 6: AccelOnly 7: Failed 8: Unknown	Current module state.
`fwVersion`	R	DisplayString	Firmware version string.
`speedIndex`	R	Gauge32	Speed index (approximate number of 1024-bit modulo exponentiation operations possible per second) of module
`minQ`	R	Gauge32	Module minimum recommended queue length
`maxQ`	R	Gauge32	Module maximum recommended queue length
`serialNumber`	R	DisplayString	Module Electronic Serial Number (ESN).
`productName`	R	DisplayString
`hwPosInfo`	R	DisplayString	Hardware bus/slot info (such as PCI slot number).
`moduleSecurityWorld`	R	TruthValue	Indicates whether or not the module is in the current SW.
`smartcardState`	R	DisplayString	Description of smart card in slot (empty, unknown card, admin/operator card from current SW, failed). N/A for acceleration only modules.
`moduleSWState`	R	Integer 1: Unknown 2: Usable 3: MaintMode 4: Uninitialized 5: Factory 6: Foreign 7: AccelOnly 8: Failed 9: Unchecked 10: InitMode 11: PreInitMode 12: Unverified 13: UnusedTableEntry	Current module and Security World state.
`moduleSWFlags`	R	DisplayString	Security World flags for this module.
`hashKML`	R	MHash	Hash of the module’s secret key.
`moduleFeatures`	R	DisplayString	Features enabled on this module.
`moduleFlags`	R	DisplayString	Like `serverFlags`, but for each module.
`versionSerial`	R	Gauge32	Firmware Version Security Number (VSN). See Version Security Number (VSN).
`hashKNETI`	R	MHash	K_NETI hash, if present.
`longQ`	R	Gauge32	Max. rec. long queue.
`connectionStatus`	R	DisplayString	Connection status (for imported modules).
`connectionInfo`	R	DisplayString	Connection information (for imported modules).
`machineTypeSEE`	R	DisplayString	SEE machine type.

moduleAdminIndex

Gauge32

Module number of this row in the table.

mode

Integer

1: Operational

2: Pre-init

3: Init

4: Pre-maint

5: Maint

6: AccelOnly

7: Failed

8: Unknown

Current module state.

fwVersion

DisplayString

Firmware version string.

speedIndex

Gauge32

Speed index (approximate number of 1024-bit modulo exponentiation operations possible per second) of module

minQ

Gauge32

Module minimum recommended queue length

maxQ

Gauge32

Module maximum recommended queue length

serialNumber

DisplayString

Module Electronic Serial Number (ESN).

productName

DisplayString

hwPosInfo

DisplayString

Hardware bus/slot info (such as PCI slot number).

moduleSecurityWorld

TruthValue

Indicates whether or not the module is in the current SW.

smartcardState

DisplayString

Description of smart card in slot (empty, unknown card, admin/operator card from current SW, failed). N/A for acceleration only modules.

moduleSWState

Integer

1: Unknown

2: Usable

3: MaintMode

4: Uninitialized

5: Factory

6: Foreign

7: AccelOnly

8: Failed

9: Unchecked

10: InitMode

11: PreInitMode

12: Unverified

13: UnusedTableEntry

Current module and Security World state.

moduleSWFlags

DisplayString

Security World flags for this module.

hashKML

MHash

Hash of the module’s secret key.

moduleFeatures

DisplayString

Features enabled on this module.

moduleFlags

DisplayString

Like serverFlags, but for each module.

versionSerial

Gauge32

Firmware Version Security Number (VSN). See Version Security Number (VSN).

hashKNETI

MHash

K_NETI hash, if present.

longQ

Gauge32

Max. rec. long queue.

connectionStatus

DisplayString

Connection status (for imported modules).

connectionInfo

DisplayString

Connection information (for imported modules).

machineTypeSEE

DisplayString

SEE machine type.

Slot administration table

The following table gives details of the nodes in the slot administration table (enterprises.nCipher.nC‑series.administration.slotAdminTable):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`slotAdminModuleIndex`	R	Integer32	Module number of the module containing the slot.
`slotAdminSlotIndex`	R	Integer32	Slot number (1-based, unlike nCore which is 0-based).
`slotType`	R	Integer 1: Datakey 2: Smart card 3: Emulated 4: Soft token 5: Unconnected 6: Out of range 7: Unknown	Slot type.
`slotFlags`	R	DisplayString	Flags referring to the contents of the slot (from `slotinfo`).
`slotState`	R	Integer 1: Unused 2: Empty 3: Blank 4: Administrator 5: Operator 6: Unidentified 7: Read error 8: Partial 9: Out of range	`Partial` refers to cards in a partially-created card set.
`slotListFlags`	R	DisplayString	Flags referring to attributes of the slot (from `getslotlist`).
`slotShareNumber`	R	Gauge32	Share number of card currently in slot, if present.
`slotSharesPresent`	R	DisplayString	Names of shares present in card currently in slot.

slotAdminModuleIndex

Integer32

Module number of the module containing the slot.

slotAdminSlotIndex

Integer32

Slot number (1-based, unlike nCore which is 0-based).

slotType

Integer

1: Datakey

2: Smart card

3: Emulated

4: Soft token

5: Unconnected

6: Out of range

7: Unknown

Slot type.

slotFlags

DisplayString

Flags referring to the contents of the slot (from slotinfo).

slotState

Integer

1: Unused

2: Empty

3: Blank

4: Administrator

5: Operator

6: Unidentified

7: Read error

8: Partial

9: Out of range

Partial refers to cards in a partially-created card set.

slotListFlags

DisplayString

Flags referring to attributes of the slot (from getslotlist).

slotShareNumber

Gauge32

Share number of card currently in slot, if present.

slotSharesPresent

DisplayString

Names of shares present in card currently in slot.

Card set administration table

The following table gives details of the nodes in the card set administration table (enterprises.nCipher.nC‑series.administration.cardsetAdminTable):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`hashKLTU`	R	MHash	Hash of the token protected by the card set.
`cardsetName`	R	DisplayString
`cardsetK`	R	Gauge32	Required number of cards in the card set.
`cardsetN`	R	Gauge32	Total number of cards in the card set.
`cardsetFlags`	R	DisplayString	Other attributes of the card set.
`cardsetNames`	R	DisplayString	Names of individual cards, if set.
`cardsetTimeout`	R	Gauge32	Token time-out period, in seconds, or 0 if none.
`cardsetGenTime`	R	DisplayString	Generation time of card set.

hashKLTU

MHash

Hash of the token protected by the card set.

cardsetName

DisplayString

cardsetK

Gauge32

Required number of cards in the card set.

cardsetN

Gauge32

Total number of cards in the card set.

cardsetFlags

DisplayString

Other attributes of the card set.

cardsetNames

DisplayString

Names of individual cards, if set.

cardsetTimeout

Gauge32

Token time-out period, in seconds, or 0 if none.

cardsetGenTime

DisplayString

Generation time of card set.

Key administration table

The key administration table is visible as long as the listKeys node in the administration sub-tree is set to a value other than none.

The following table gives details of the nodes in the key administration table (enterprises.nCipher.nC‑series.administration.keyAdminTable):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`keyAppname`	R	DisplayString	Application name.
`keyIdent`	R	DisplayString	Name of key, as generated by the application.
`keyHash`	R	MHash
`keyRecovery`	R	Integer 1: Enabled 2: Disabled 3: No key 4: Unknown 5: Invalid 6: Unset	The value `unset` is never returned by the key table. If you set the value `unset`, the keys are not filtered based on any of the attributes.
`keyProtection`	R	Integer 1: Module 2: Cardset 3: No key 4: Unknown 5: Invalid 6: Unset	The value `unset` is never returned by the key table. If you set the value `unset`, the keys are not filtered based on any of the attributes.
`keyCardsetHash`	R	MHash	Hash of the card set protecting the key, if applicable.
`keyFlags`	R	DisplayString	Certificate and public key flags.
`keyExtraEntries`	R	Gauge32	Number of extra key attributes.
`keySEEInteg`	R	DisplayString	SEE integrity key, if present.
`keyGeneratingESN`	R	DisplayString	ESN of the module that generated the key, if present.
`keyTimeLimit`	R	Gauge32	Time limit for the key, if set.
`keyPerAuthUseLimit`	R	Gauge32	Per-authentication use limit for the key.

keyAppname

DisplayString

Application name.

keyIdent

DisplayString

Name of key, as generated by the application.

keyHash

MHash

keyRecovery

Integer

1: Enabled

2: Disabled

3: No key

4: Unknown

5: Invalid

6: Unset

The value unset is never returned by the key table. If you set the value unset, the keys are not filtered based on any of the attributes.

keyProtection

Integer

1: Module

2: Cardset

3: No key

4: Unknown

5: Invalid

6: Unset

The value unset is never returned by the key table. If you set the value unset, the keys are not filtered based on any of the attributes.

keyCardsetHash

MHash

Hash of the card set protecting the key, if applicable.

keyFlags

DisplayString

Certificate and public key flags.

keyExtraEntries

Gauge32

Number of extra key attributes.

keySEEInteg

DisplayString

SEE integrity key, if present.

keyGeneratingESN

DisplayString

ESN of the module that generated the key, if present.

keyTimeLimit

Gauge32

Time limit for the key, if set.

keyPerAuthUseLimit

Gauge32

Per-authentication use limit for the key.

Key query sub-tree

The key query sub-tree is used if the listKeys node in the administration sub-tree is set to query.

If these values are set, they are taken as required attributes for filtering the list of available keys; if multiple attributes are set, the filters are combined (AND rather than OR).

The following table gives details of the nodes in the key query sub-tree (enterprises.nCipher.nC‑series.administration.keyQuery):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`keyQueryAppname`	R/W	DisplayString	Application name.
`keyQueryIdent`	R/W	DisplayString	Name of key, as generated by the application.
`keyQueryHash`	R/W	DisplayString
`keyQueryRecovery`	R/W	Integer 1: Enabled 2: Disabled 3: No key 4: Unknown 5: Invalid 6: Unset	The value `unset` is never returned by the key table. If you set the value `unset`, the keys are not filtered based on any of the attributes.
`keyQueryProtection`	R/W	Integer 1: Module 2: Cardset 3: No key 4: Unknown 5: Invalid 6: Unset	The value `unset` is never returned by the key table. If you set the value `unset`, the keys are not filtered based on any of the attributes.
`keyQueryCardsetHash`	R/W	DisplayString	Hash of the card set protecting the key, if applicable.
`keyQueryFlags`	R/W	DisplayString	Certificate and public key flags.
`keyQueryExtraEntries`	R/W	Gauge32	Number of extra key attributes.
`keyQuerySEEInteg`	R/W	DisplayString	SEE integrity key, if present.
`keyQueryGeneratingESN`	R/W	DisplayString	ESN of the module that generated the key, if present.
`keyQueryTimeLimit`	R/W	Gauge32	Time limit for the key, if set (0 for no limit).
`keyQueryPerAuthUseLimit`	R/W	Gauge32	Per-authentication use limit for the key (0 for no limit).

keyQueryAppname

R/W

DisplayString

Application name.

keyQueryIdent

R/W

DisplayString

Name of key, as generated by the application.

keyQueryHash

R/W

DisplayString

keyQueryRecovery

R/W

Integer

1: Enabled

2: Disabled

3: No key

4: Unknown

5: Invalid

6: Unset

The value unset is never returned by the key table. If you set the value unset, the keys are not filtered based on any of the attributes.

keyQueryProtection

R/W

Integer

1: Module

2: Cardset

3: No key

4: Unknown

5: Invalid

6: Unset

The value unset is never returned by the key table. If you set the value unset, the keys are not filtered based on any of the attributes.

keyQueryCardsetHash

R/W

DisplayString

Hash of the card set protecting the key, if applicable.

keyQueryFlags

R/W

DisplayString

Certificate and public key flags.

keyQueryExtraEntries

R/W

Gauge32

Number of extra key attributes.

keyQuerySEEInteg

R/W

DisplayString

SEE integrity key, if present.

keyQueryGeneratingESN

R/W

DisplayString

ESN of the module that generated the key, if present.

keyQueryTimeLimit

R/W

Gauge32

Time limit for the key, if set (0 for no limit).

keyQueryPerAuthUseLimit

R/W

Gauge32

Per-authentication use limit for the key (0 for no limit).

Statistics sub-tree overview

The statistics sub‑tree (enterprises.nCipher.nC‑series.statistics) contains rapidly changing information about such topics as the state of the nShield modules, the work they are doing, and the commands being submitted.

Do not rely on information returned from the agent to change instantaneously on re-reading the value. To avoid loading the nShield module with multiple time‑consuming statistics commands, the agent can choose to cache the values over a specified period. You can configure this period in the agent configuration file see The SNMP configuration file: snmp.conf.

Statistics sub-tree

The following table gives details of the nodes in the statistics sub‑tree, and the module statistics table (enterprises.nCipher.nC‑series.statistics.moduleStatsTable):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`moduleStatsIndex`	R	Integer	Module number of this row (for `moduleStatsTable`).
`hsuptime`	R	Counter32	Uptime of the hardserver.
`cmdCountAll`	R	Counter32	Returned aggregated for all modules and all commands.
`cmdBytesAll`	R	Counter32
`cmdErrorsAll`	R	Counter32	Returned as for `cmdCount`, returned value is combined module errors added to hardserver marshalling/unmarshalling errors.
`replyCountAll`	R	Counter32
`replyBytesAll`	R	Counter32
`replyErrorsAll`	R	Counter32	See notes above for `cmdErrors`.
`clientCount`	R	Gauge32
`maxClients`	R	Counter32
`deviceFails`	R	Counter32
`deviceRestarts`	R	Counter32
`outstandingCmds`	R	Counter32	Total number of outstanding commands over all modules.
`load[All]`	R	Counter32

moduleStatsIndex

Integer

Module number of this row (for moduleStatsTable).

hsuptime

Counter32

Uptime of the hardserver.

cmdCountAll

Counter32

Returned aggregated for all modules and all commands.

cmdBytesAll

Counter32

cmdErrorsAll

Counter32

Returned as for cmdCount, returned value is combined module errors added to hardserver marshalling/unmarshalling errors.

replyCountAll

Counter32

replyBytesAll

Counter32

replyErrorsAll

Counter32

See notes above for cmdErrors.

clientCount

Gauge32

maxClients

Counter32

deviceFails

Counter32

deviceRestarts

Counter32

outstandingCmds

Counter32

Total number of outstanding commands over all modules.

load[All]

Counter32

Module statistics table

The following table gives details of the nodes in the module statistics table (enterprises.nCipher.nC‑series.statistics.moduleStatsTable):

Node name R/W Type Remarks

Node name	R/W	Type	Remarks
`moduleStatsIndex`	R	Integer	Module number of this row (for `moduleStatsTable`).
`uptime`	R	Counter32	Uptime of the module.
`cmdCount`	R	Counter32	Returned aggregated for all commands.
`cmdBytes`	R	Counter32
`cmdErrors`	R	Counter32	Returned as for `cmdCount` all the different error states aggregated into one counter.
`replyCount`	R	Counter32
`replyBytes`	R	Counter32
`replyErrors`	R	Counter32	See notes above for `cmdErrors`.
`loadModule`	R	Counter32
`loadModule`	R	Counter32
`objectCount`	R	Gauge32
`clock`	R	DisplayString	Depending on the module settings, this can require K_NSO permissions to read (and therefore depend on the installation parameters of the agent).
`currentTemp`	R	DisplayString	Character representation of the current temperature value (SNMP does not provide for a floating-point type). Only available on non-XC variants.
`maxTemp`	R	DisplayString	Maximum temperature the module has ever reached. Only available on non-XC variants.
`nvRAMInUse`	R	Gauge32
`volatileRAMInUse`	R	Gauge32
`tempSP`	R	DisplayString	Only available on XC variants.
`currentCPUTemp1`	R	DisplayString	Only available on XC variants.
`currentCPUTemp2`	R	DisplayString	Only available on XC variants.
`currentFanSpeed`	R	DisplayString	Only available on XC variants.
`currentFanDuty`	R	DisplayString	Only available on XC variants.
`CPUVoltage1`	R	DisplayString	Only available on XC variants.
`CPUVoltage2`	R	DisplayString	Only available on XC variants.
`CPUVoltage3`	R	DisplayString	Only available on XC variants.
`CPUVoltage4`	R	DisplayString	Only available on XC variants.
`CPUVoltage5`	R	DisplayString	Only available on XC variants.
`CPUVoltage6`	R	DisplayString	Only available on XC variants.
`CPUVoltage7`	R	DisplayString	Only available on XC variants.
`CPUVoltage8`	R	DisplayString
`CPUVoltage9`	R	DisplayString
`CPUVoltage10`	R	DisplayString
`CPUVoltage11`	R	DisplayString

moduleStatsIndex

Integer

Module number of this row (for moduleStatsTable).

uptime

Counter32

Uptime of the module.

cmdCount

Counter32

Returned aggregated for all commands.

cmdBytes

Counter32

cmdErrors

Counter32

Returned as for cmdCount all the different error states aggregated into one counter.

replyCount

Counter32

replyBytes

Counter32

replyErrors

Counter32

See notes above for cmdErrors.

loadModule

Counter32

loadModule

Counter32

objectCount

Gauge32

clock

DisplayString

Depending on the module settings, this can require K_NSO permissions to read (and therefore depend on the installation parameters of the agent).

currentTemp

DisplayString

Character representation of the current temperature value (SNMP does not provide for a floating-point type). Only available on non-XC variants.

maxTemp

DisplayString

Maximum temperature the module has ever reached. Only available on non-XC variants.

nvRAMInUse

Gauge32

volatileRAMInUse

Gauge32

tempSP

DisplayString