netenable

netenable
netenable [iface=0]
netenable iface=0 [enable_ipv4=yes] [enable_ipv6=no] [ipv6_conf_addr=no]

Gets or sets the nethsm_enable configuration.

Option Description

iface

The Ethernet interface number (0 or 1).

  • If iface is not specified on the command line, the current setting of both interfaces will be displayed.

  • If iface is specified without arguments, then the current setting of that interface will be displayed.

enable_ipv4

Indicator of whether the IPv4 protocol on the interface is enabled.
Default: yes.

enable_ipv6

Indicator of whether the IPv6 protocol on the interface is enabled.
Default: no.

ipv6_conf_addr

Indicator of whether the interface uses IPv6 static addresses or SLAAC.
Default: static.