netHSMNetwork sub-tree

netHSMNetwork sub-tree (enterprises.nCipher.nC-series.netHSMNetwork) contains information about the network interfaces of the network-attached HSMs (nShield Connect, nShield 5c).

To output the network interface information in SNMP, you must enable both NIC exposure settings. For information how to enable them, see NIC Reporting.

netHSMNICTable sub-tree

netHSMNICTable (enterprises.nCipher.nC-series.netHSMNetwork.netHSMNICTable) provides information about the name and link state of the network interface.

Node name R/W Type Remarks

ifModule

R

Integer

The remote module number of the HSM

ifIndex

R

Integer

The number of the network interface on the HSM

ifState

R

Integer

The link state of the network interface.

0 = Down

1 = Up

ifName

R

DisplayString

The name of the interface. The interface names are eth0 and eth1.

When interface bonding is enabled, a third interface will show as bond0.

netHSMNICAddressTable sub-tree

netHSMNICAddressTable (enterprises.nCipher.nC-series.netHSMNetwork.netHSMNICAddressTable) provides the network address of the interface.

The maximum number of addresses that can be reported for an interface is 10.

Node name R/W Type Remarks

ifAddress

R

DisplayString

The IPv4 or IPv6 address of the interface.

When interface bonding is enabled, eth0 and eth1 interface addresses are displayed as 0.0.0.0.