Top-level menu
This guide covers the following HSMs:
-
nShield Connect
-
nShield 5c
If you select an option, the module displays the menu options in the level below.
If you cancel a selected option, you return to level above.
Submenus for options marked with *
depend on the settings of the module.
1 System
1-1 System configuration
1-1-1 Network config
1-1-1-1 Set up interface #1
1-1-1-2 Set up interface #2
1-1-1-3 Set up bond
1-1-1-4 Set default gateway
1-1-1-5 Set up routing *
1-1-1-6 Show routing table
1-1-1-7 Ping remote host
1-1-1-8 Trace route to host
1-1-2 Hardserver config
1-1-3 Remote file system
1-1-4 Client config *
1-1-5 Resilience config
1-1-6 Config file options
1-1-6-1 Fetch configuration
1-1-6-2 Client config push
1-1-7 Log config
1-1-8 Date/time setting
1-1-9 Keyboard layout
1-1-9-1 UK keyboard
1-1-9-2 US keyboard
1-1-10 Default config
1-1-11 Remote configuration options
1-1-11-1 Remote mode change
1-2 System information
1-2-1 View system log
1-2-2 View hardserver log
1-2-3 View IPv6 addresses
1-2-4 Display tasks
1-2-5 Component versions
1-2-6 View h/w diagnostics
1-2-6-1 View power readings
1-2-6-2 View other readings
1-2-6-3 Critical Errors
1-2-7 View tamper log
1-2-8 View unit id
1-3 Login settings
1-3-1 Enable UI Lockout
1-3-1-1 UI Lockout with OCS
1-3-1-2 UI Lockout w/out OCS
1-3-2 Power switch lockout
1-3-3 Login control status
1-4 Upgrade system
1-5 Factory state
1-6 Shutdown/Reboot
1-6-1 Shutdown
1-6-2 Reboot
2 HSM
2-1 HSM information
2-1-1 Display details
2-1-2 Display secure RTC
2-1-3 Speed test
2-1-4 Display statistics
2-2 HSM reset
2-3 HSM feature enable
2-3-1 Read FEM from card
2-3-2 Read from a file
2-3-3 View current state
2-3-4 Write state to file
2-4 Set HSM mode
2-4-1 Operational
2-4-2 Initialization
3 Security World mgmt
3-1 Display World info
3-2 Module initialization
3-2-1 New Security World
3-2-2 Load Security World
3-2-3 Erase Security World
3-3 RFS operations
3-3-1 Update World files
3-3-2 Remove RFS lock
3-4 Admin operations
3-4-1 Replace ACS
3-4-2 Recover keys
3-4-3 Recover PIN
3-4-4 Set secure RTC
3-5 Cardset operations
3-5-1 Create OCS
3-5-2 List cardsets
3-6 Card operations
3-6-1 Card details
3-6-2 Check PIN
3-6-3 Change PIN
3-6-4 Erase card
3-7 Keys
3-7-1 List keys
3-7-2 Verify key ACLs
3-8 Set up remote slots *
3-9 Set up dynamic slots
3-9-1 Dynamic Slots
3-9-2 Slot mapping
4 CodeSafe *