A link to the Entrust website
nShield Documentation
Videos Contact support

nShield Security World

    • nShield Security World v13.6.11 Release Notes
    • nShield Security World v13.6.11 Security Manual
      • Supply and Transportation
      • Environment
      • Commissioning
      • Access Control
      • Operation
      • Key Management
      • Physical Security
      • Audit
      • Support and Maintenance
      • Security Incident and Response
      • Decommission and Disposal
      • Abbreviations
    • nShield v13.6.11 Hardware Install and Setup Guides
      • nShield Network-Attached HSMs
        • Prerequisites and product information
        • Install a network-attached HSM into a rack
      • nShield PCIe HSMs
        • Prerequisites and product information
        • Install a PCIe HSM
      • nShield USB HSMs
        • Prerequisites and product information
        • Set up the nShield Edge
    • nShield Security World Software v13.6.11 Installation Guide
      • Before you install the software
      • Install the Security World software
      • Using silent installations
      • Problems during installation and commissioning
      • Uninstalling Security World Software
      • System upgrade
      • Software packages on the installation media
    • nShield v13.6.11 HSM User Guide
      • nShield Network-Attached HSMs
        • Physical security of the HSM
        • Front panel controls
        • Top-level menu
        • Basic HSM, RFS and client configuration
        • Client software and module configuration: network-attached HSMs
        • HSM and client configuration files
        • Checking and changing the mode on a network-attached HSM
        • Upgrading the image file and associated firmware: network-attached HSMs
        • Troubleshooting
        • HSM maintenance
        • Approved accessories
        • Resource Watchdog
        • Valid IPv6 Addresses
        • Remote File System Volumes
      • nShield PCIe HSMs
        • Client software and module configuration: PCIe and USB HSMs
        • Hardserver configuration files
        • Checking and changing the mode on an nShield Solo module
        • nShield 5s modes of operation
        • Upgrade firmware: nShield 5s
        • Upgrade firmware: nShield Solo, Solo XC, and Edge HSMs
        • Setting the system clock
        • Checking the installation
        • HSM status indicators and error codes (nShield 5s)
        • HSM Status indicators (nShield Solo and Solo XC)
        • Regulatory notices
        • Battery replacement
        • Replace the fan (Solo XC)
        • Set up communication between host and module (nShield 5s HSMs)
        • SSH Client Key Protection (nShield 5s HSMs)
        • Troubleshooting 5s
        • Virtualization Remote Server
      • nShield USB HSMs
        • Using the nShield Edge
        • Checking and changing the mode on an nShield Edge
        • nShield Edge Windows compatibility issues and considerations
        • Troubleshooting
        • Regulatory notices
      • HSM Management
        • Optional features
          • Enable features on a network-attached HSM
          • Enable features on PCIe and USB HSMs
        • Administration of platform services (nShield 5 HSMs)
        • Client cooperation
        • Morse code error messages
        • Working with CodeSafe
        • Warrant Management
        • Remote HSMs
        • Remote Operator
        • Using nShield commands from PowerShell
        • Preload Utility
        • Audit Logging
        • nShield Audit Log Service
        • Configure the hardserver to export the module for guest VM usage
        • Logging, debugging, and diagnostics
        • System logging (nShield 5 HSMs)
        • Maintenance of nShield Hardware
        • Physical security of the HSM
        • Application Performance Tuning
        • Platform services and (nShield 5 HSMs)
        • System upgrade
        • Product returns
    • nShield Security World v13.6.11 Management Guide
      • Security World infrastructure
      • Robustness
      • Security World keys
      • Security World options
      • Create a new Security World
      • Add HSMs to a Security World
      • Remove modules and delete Security Worlds
      • Security World Files
      • Managing card sets and softcards
        • View cards and softcards
        • Erase cards and softcards
        • Passphrases
        • Operator Card Sets (OCS)
        • Replace OCS and softcards
        • Softcards
        • Replace the ACS
      • Application interfaces
      • Environment variables
    • CodeSafe 5 v13.6.11 Developer Guide
      • Overview of CodeSafe 5
      • Install the CodeSafe 5 SDK on Linux
      • Install the CodeSafe 5 SDK on Windows
      • nShield 5c Codesafe 5 Configuration
      • Build CodeSafe 5 SDK apps
      • Sign and deploy CodeSafe 5 SDK apps using csadmin
      • Build and sign example SEE machines on Linux
      • Build and sign example SEE machines on Windows
      • Build and run Java examples
      • Debug CodeSafe 5 SEE machines
      • Uninstall the CodeSafe 5 SDK
      • Port existing CodeSafe application to CodeSafe 5
      • Supporting legacy CodeSafe Direct
      • SEE API documentation
      • System calls allowed by CodeSafe 5 SEE machines
    • CodeSafe v13.6.11 Developer Guide
      • About the Secure Execution Engine SEE
      • Designing SEE machines and SEE-ready HSMs
      • Example SEE machines
      • Debugging SEE machines
      • Deploying SEE Machines
      • Utilities
      • Environment variables
      • SEElib functions
      • Differences between glibc and bsdlib (SoloXC only)
      • Allowlist for SEE machines
    • Remote Administration v13.6.11 User Guide
      • Requirements
      • Server-side preparation tasks
      • Install the Remote Administration Client (RAC) software
      • Use the Remote Administration Client (RAC) software
      • Troubleshooting
      • Uninstall the Remote Administration Client (RAC) software
    • TVD v13.6.11 Install and User Guide
      • Safety and security
      • Setting up the nShield Trusted Verification Device
      • Using the nShield Trusted Verification Device
      • Dimensions and operating temperatures
    • nShield v13.6.11 Utilities Reference
      • anonkneti
      • appliance-cli
      • bondcfg
      • bondlink
      • bulkerase
      • cardpp
      • cef-audit-verify
      • cfg-mkdefault
      • cfg-dynamicslots
      • cfg-mkcardlist
      • cfg-pushnethsm
      • cfg-pushntp
      • cfg-remoteslots
      • cfg-reread
      • checkmod
      • chkserv
      • ckaesgen
      • ckariagen
      • ckcerttool
      • ckcmac-ctr
      • ckcrypt
      • ckdes3gen
      • ck_ecedwards_gen
      • ckecies
      • ck_ecmontgomery_gen
      • ckhyper
      • ckcheckinst
      • cknfkmid
      • ckshahmac
      • cksigtest
      • ckinfo
      • ckkeyloop
      • cklist
      • ckmechinfo
      • ckrestrictkey
      • ckrsagen
      • cksotool
      • ck-xfer-fix
      • config-auditlogging
      • cpioc
      • cngimport
      • cnginstall32, cnginstall
      • cnglist32, cnglist
      • cngregister
      • cngsoak, cngsoak64
      • config-serverstartup
      • configure-csp-poolmode, configure-csp-poolmode64
      • createocs
      • cryptest
      • csadmin
      • cspcheck, cspcheck64
      • cspimport, cspimport64
      • cspmigrate, cspmigrate64
      • cspnvfix, cspnvfix64
      • csptest, csptest64
      • csputils, csputils64
      • date
      • des_kat
      • display-pubkey
      • dump-marshalled
      • elftool
      • enquiry
      • esn
      • factorystate
      • fet
      • floodtest
      • fwcheck
      • fwversion
      • gateway
      • gateway6
      • generatekey
      • getrtc
      • hakever
      • help
      • hsc_configurepoolmodule
      • hsc_configureslots
      • hsc_loadseemachine
      • hsc_loadwarrants
      • hsc_nethsmexports
      • hsc_nethsmimports
      • hsc_remotefilesystem
      • hsc_serverremotecomms
      • hsc_serversettings
      • hsc_servicehosts
      • Administration of platform services (nShield 5 HSMs)
      • hsmdiagnose
      • initunit
      • killrecov
      • km-plode
      • kmfile-dump
      • kneti
      • kptest
      • keytst, keytst64
      • loadmache
      • loadrom
      • loadsee-setup
      • logout
      • sbin/logrotate-hardserver
      • logs
      • maintmode
      • makecspyuserdata
      • migrate-world
      • mkaclx
      • modstate
      • ncdate
      • ncssh
      • ncperftest
      • ncsvcdep
      • ncversions
      • ncthread-test
      • netcfg
      • netcfg6
      • netdiagnose
      • netenable
      • nethsmadmin
      • nethsmenroll
      • netlink
      • new-world
      • nfcp
      • nfdiag
      • nfkmattest
      • nfkmcheck
      • nfkminfo
      • nfkmverify
      • nfloadmon
      • nfls
      • nfrm
      • nfwarrant
      • nopclearfail
      • npkgtool
      • nshieldaudit
      • ntokenenroll
      • nvram-backup
      • nvram-sw
      • openssl
      • p11hyper
      • passwd
      • perfcheck
      • ping
      • pollbare
      • postload-bsdlib
      • postrocs
      • ppmk
      • preload
      • pubkey-find
      • push
      • raccmd
      • racgui
      • racs
      • randchk
      • reboot
      • retrievewarrants
      • rfs-setup
      • rfs-sync
      • rfsaddr
      • rocs
      • route
      • route6
      • routing
      • routing6
      • rserverperm
      • rtc
      • see-sock-serv, see-stdioe-serv, see-stdioesock-serv, see-stdoe-serv
      • setrtc
      • sigtest
      • slotinfo
      • stattree
      • sworldcheck
      • tamperlog
      • tct2
      • trial
      • uptime
      • version
    • nShield Security World v13.6.11 Key Management Guide
      • Working with keys
      • Key generation options and parameters
      • Using KeySafe
      • Key migration
      • Common Criteria CMTS Mode Assigned Keys (nShield Solo XC)
      • Merged Keys Concept
      • Cryptographic algorithms
        • Configuration
        • Functionality
        • Asymmetric Algorithms and Mechanisms
        • Symmetric Mechanisms and Algorithms
        • DeriveKey Mechanisms
        • Internal Security Mechanisms
    • nCore v13.6.11 Developer Tutorial
      • nCore architecture
      • C tutorial
      • Java tutorial
      • Python 3 tutorial
      • Java examples
      • Key structures
      • NFKM Functions
      • OpenSSL with NFKM Engine
      • nCore API commands
      • Transaction IDs
    • Microsoft CryptoAPI Guide for nShield Security World v13.6.11
      • nShield Architecture
      • Microsoft CAPI CSP
      • CSP Setup and Utilities
      • Utilities for the CAPI CSP
      • Supported Algorithms
      • Key Generation and Storage
      • User Interface Issues
      • Key Counting
      • NVRAM-Stored Keys
      • Container Storage Format
    • Microsoft CNG Guide for nShield Security World v13.6.11
      • nShield Architecture
      • CNG Architecture Overview
      • Register the nShield CNG CSP
      • Supported Algorithms
      • Migrate keys for CNG
      • Key Authorization
      • Key Use Counting
      • Using CAPI Keys
      • Utilities
      • Environment Variables for CNG Protection
    • nCipherKM JCA JCE CSP v13.6.11 API Guide
      • nShield Architecture
      • Installing the nCipherKM JCA/JCE CSP
      • System Properties
      • Compatibility
      • Architecture
      • Available Functions
      • The KeyStore API
      • Initialization
      • Loading and Storing Keys
      • keytool
      • Using Keys
    • PKCS 11 Reference Guide for nShield Security World v13.6.11
      • nShield Architecture
      • PKCS #11 Developer libraries
      • PKCS #11 with load sharing mode
      • PKCS #11 with HSM Pool mode
      • Generating and deleting NVRAM-stored keys with PKCS #11
      • PKCS #11 with key reloading
      • PKCS #11 without load-sharing or HSM Pool modes
      • PKCS #11 with preload
      • PKCS #11 Security Officer
      • nShield-specific PKCS #11 API extensions
      • Compiling and linking
      • nShield PKCS #11 library environment variables
      • Objects
      • Mechanisms
      • Vendor annotations on P11 mechanisms
      • Vendor-defined mechanisms
      • KISAAlgorithm mechanisms
      • Attributes
      • Utilities
      • Functions
      • General purpose functions
      • Slot and token management functions
      • Standard session management functions
      • nShield session management functions
      • Object management functions
      • Encryption functions
      • Decryption functions
      • Message digesting functions
      • Signing and MACing functions
      • Functions for verifying signatures and MACs
      • Dual-purpose cryptographic functions
      • Key-management functions
      • Random number functions
      • Parallel function management functions
      • Callback functions
    • nShield SNMP Monitor v13.6.11 Install and User guide
      • Install and activate the nShield SNMP monitoring agent
      • Basic configuration
      • USM users
      • Traditional access control
      • VACM configuration
      • Trap Configuration
      • Using the SNMP agent with a manager application
        • MIB module overview
        • Memory usage monitoring
        • Administration sub-tree overview
        • netHSMNetwork sub-tree
        • Statistics sub-tree overview
      • SNMP agent command-line
    • PDFs
nShield Security World v13.6.11
  • Application Notes
  • Cloud Integration Option Pack
    • v2.2.3
    • v2.2.2
    • v2.2.1
  • KeySafe 5
    • v1.4
    • v1.3
    • v1.2
    • v1.1
    • v1.0
  • nShield Container Option Pack
    • v1.1.3
    • v1.1.2
    • v1.1.1
  • nShield Database Security Option Pack
    • v2.1.0
  • nShield Docs
  • nShield HSM hardware regulatory and maintenance documentation
  • nShield Key Attestation
    • v1.0.2
  • nShield Monitor
    • v3.1.0
    • v3.0.0
    • v2.9.8
    • v2.9.7
    • v2.9.5
    • v2.9.0
    • v2.8.0
  • nShield Post-Quantum Software Development Kit
    • v1.1.3
    • v1.2.1
    • v1.1.0
  • nShield Security World
    • v13.6.11
    • v13.7.3
    • v13.5.1
    • v13.4.5
    • v13.3
    • v13.2.4
    • v12.81
    • v12.80
    • v12.72.4
    • v12.50.4
    • v12.40
  • nShield Security World Release Information
  • Release Notes
  • Time Stamp Option Pack
    • v8.1.0
    • 8.0.0
    • 7.20.0
  • Web Services Option Pack
    • v3.3.1
    • v3.3.0
    • v3.2.0
    • v3.1.0
    • v3.0.2
  • Web Services SQLEKM Provider
    • v1.0.0
  • nShield Security World
  • PDFs
v13.6.11 v13.7.3 v13.5.1 v13.4.5 v13.3 v13.2.4 v12.81 v12.80 v12.72.4 v12.50.4 v12.40
Email the nShield docs team

PDFs

nShield Security World

  • nShield Security World v13.6.11 Release Notes

  • nShield Security World v13.6.11 Security Manual

  • nShield v13.6.11 Hardware Install and Setup Guides

  • nShield Security World Software v13.6.11 Installation Guide

  • nShield v13.6.11 HSM User Guide

  • nShield Security World v13.6.11 Management Guide

  • nShield Security World v13.6.11 Key Management Guide

  • nShield v13.6.11 Utilities Reference

  • CodeSafe 5 v13.6.11 Developer Guide

  • CodeSafe v13.6.11 Developer Guide

  • Remote Administration v13.6.11 User Guide

  • TVD v13.6.11 Install and User Guide

nShield API

  • nCore v13.6.11 Developer Tutorial

  • Microsoft CryptoAPI Guide for nShield Security World v13.6.11

  • Microsoft CNG Guide for nShield Security World v13.6.11

  • nCipherKM JCA/JCE CSP v13.6.11 API Guide

  • PKCS #11 Guide for nShield Security World v13.6.11

  • nShield SNMP Monitor v13.6.11 Install and User Guide

©2025 Entrust Corporation. All rights reserved.

This website was last updated on